|
 |
Fittings & Jackets
 RPR Insul-Mate® Fittings and Covers
Speedline® 25/50 Smoke-Safe™ PVC
Proto PVC Fitting Covers
Description - The Proto® Fitting Cover System consists of one-piece, pre-molded, high-impact PVC fitting covers with fiber glass inserts and accessories. Accessories are elbows, tee/valves, end caps, mechanical line couplings, specialty fittings, jacketing, tacks, and PVC tape.
Application - The Proto Fitting Cover System is used to insulate mechanical piping systems at fitting locations. It provides PVC jacketing for straight run piping and gives a quality appearance and excellent durability.
Features and Benefits:
Fire and Smoke Safety
- Proto PVC Fittings do not exceed 25 Flame Spread, 50 Smoke Developed.
- Roll jacketing is available in 25/50-rated or indoor/outdoor grade.
- The 25/50 products meet most fire and safety requirements of federal state and local building codes.
UV Resistant
- Use indoors or outdoors.
- Paint outdoor fittings to enhance UV and colorfast protection.
Excellent Appearance
- Bright high-gloss white coloring adds a distinct quality appearance to the system.
Easy to Clean
- The smooth high-gloss surface cleans easily with soap and water.
- Ideal system for food and drug facilities.
Low-Cost Installation
- Significant cost savings vs. conventional cement, molded sections and mitered sections.
Fast and Easy
- At fitting locations, the fiber glass insert is wrapped around the pipe fitting, the Proto PVC Fitting is applied over the insert and then tacked or taped.
Wide Temperature Range
- For mechanical piping systems operating to 500°F (260°C)
Long Lasting
- Can be used more than once on retrofit projects, general maintenance.
Excellent Thermal Value
- Low thermal conductivity value of 0.26 at 75°F (0.037 W/m2•°C) mean temperature.
- Better thermal efficiency than conventional cement fittings.
Resistant to Fungi and Bacteria
- Does not promote growth of fungi or bacteria.
Specification Compliance
In U.S.: Federal (Polyvinyl Chloride)
- LP-1035A; Type II Grade GU and Type III
- LP-535E; Type II Grade GU and Type III
- New York City MEA 243-84-M, Chicago, Los Angeles
- ASTM C 585 (Sizes)
- United State Department of Agriculture
In Canada:
Physical Properties (PVC)
Specific Gravity (ASTM D 792)
Tensile Modulus (ASTM D 638)
Tensile Strength (ASTM D 638)
Flexural Strength (ASTM D 790)
IZOD Impact (0.25") ft. (ASTM D 256)
- 16.8 lb. per inch of notch
Heat Deflection (ASTM D 648)
Water Vapor Transmission
Mocon Permatran W-1 Method (ASTM E 96 (Equiv.)) (U.S. Perms)
- 100°F (38°C) & 90% relative humidity:
.007" (.177 mm) thick = .19
.009" (.228 mm) thick = .15
.022" (.558 mm) thick = .07
- 73°F (23°C) & 50% relative humditiy:
.006" (.152 mm) thick = .19
.010" (.254 mm) thick = .13
.022" (.558 mm) thick = .09
Puncture Resistance(TAPPI Test T803) (Beach Units)
- .006" (.152 mm) thick = 78
.015" (.381 mm) thick = 221
THERMAL EFFICIENCY OF INSERT (ASTM C 177)
|
Mean
Temperature |
Mean
Temperature (SI) |
k |
k (SI) |
| 100°F |
38°C |
.28 |
.040 |
| 200°F |
93°C |
.38 |
.055 |
| 300°F |
149°C |
.52 |
.075 |
| 400°F |
204°C |
.70 |
.101 |
| 500°F |
260°C |
.90 |
.130 |
|
|
RPR Insul-Mate®
